Measure
Finished mattress and opening clearance
Defined peel-and-seal closing
Adhesive Seal Mattress Bag
A side-gusseted mattress bag with an adhesive flap positioned for a cleaner and more repeatable closing step after loading.
- Best fit
- Moving, storage and fulfillment
- Closure
- Approved adhesive flap position
- Construction
- Side gusset with bottom seal
- Approval
- Closure and fit sample
Product evidence
Product, structure and use
Images show the product or application being discussed. Fit, performance and final construction remain subject to the approved order specification.
Specification workflow
How to specify this product
The bag must fit the mattress and also leave enough controlled flap depth for the selected tape and operator closing motion.
Position
Tape line, flap depth and peel directionChoose
Permanent or resealable intent for testingApprove
Loaded fit and closure sampleReference only
Example mattress-bag dimensions
These examples are not automatic production sizes. Final dimensions and thickness are released only after the mattress, loading and closing method are confirmed.
| Reference | Width | Gusset | Length | Thickness |
|---|---|---|---|---|
| Reference 01 | 39 in / 991 mm | 8 in / 203 mm | 86 in / 2,184 mm | 70 μm / ≈3 mil |
| Reference 02 | 54 in / 1,372 mm | 10 in / 254 mm | 91 in / 2,311 mm | 70 μm / ≈3 mil |
| Reference 03 | 60 in / 1,524 mm | 12 in / 305 mm | 95 in / 2,413 mm | 70 μm / ≈3 mil |
| Reference 04 | 78 in / 1,981 mm | 14 in / 356 mm | 100 in / 2,540 mm | 70 μm / ≈3 mil |
Material options
Film
- Clear LDPE
- LDPE / LLDPE blend
Product geometry
Construction
- Side gusset
- Adhesive flap
- Bottom seal
Order-specific
Customization
- Tape position and flap depth
- Resealable or permanent adhesive after testing
- Warning text
- Vent holes
Order-specific quality plan
What can be checked
Methods and sampling are agreed in the control plan. The examples below are not universal fixed inspection frequencies or performance guarantees.
Closure position
Measure tape line and flap depth against the released drawing
- Applies when
- Every adhesive construction
Adhesive behavior
Peel and closure observation under agreed sample conditions
- Applies when
- During sample approval and agreed lot checks
Seal integrity
Manual pull or agreed observation of heat-sealed areas
- Applies when
- Bottom and side seals where present
Dimensions and appearance
Finished measurement and controlled visual review
- Applies when
- Finished-lot release
Before quotation
Product FAQ
Are these dimensions automatically suitable for my mattress?
No. They are reference sizes only. The final bag must be confirmed from the finished mattress dimensions, loading direction and closure allowance.
Can I approve a sample before production?
Yes. Fit and closure should be reviewed on a sample when the mattress construction or packing process is new.
Start with the packed product
Build a workable product specification
Send the details below and we will identify the dimensions, construction and approval points still needing confirmation.
- Finished mattress dimensions
- Loading and peel direction
- Flap depth or current sample
- Closure intent
- Quantity and destination